Agilent Technologies 6631B - Manual (Page 49)

Language Dictionary - 4
49
MEASure:CURRent:LOW?
FETCh:CURRent:LOW?
Agilent 66312A, 66332A Only
These queries return the Low level current of a current pulse waveform. The instrument first measures the
minimum and maximum data points of the pulse waveform. It then generates a histogram of the pulse
waveform using 1024 bins between the maximum and minimum data points. The bin containing the most
data points below the 50% point is the low bin. The average of all the data points in the low bin is returned
as the Low level. If no low bin contains more than 1.25% of the total number of acquired points, then the
minimum value is returned by these queries.
Query Syntax MEASure[SCALar]:CURRent:LOW?
FETCh[:SCALar]:CURRent:LOW?
Parameters None
Examples MEAS:CURR:LOW? FETC:CURR:LOW?
Returned Parameters
Related Commands MEAS:CURR:HIGH? CALC:REF:LOW
MEASure:CURRent:MAXimum?
FETCh:CURRent: MAXimum?
Agilent 66312A, 66332A Only
These queries return the maximum output current reading from the measurement sample.
Query Syntax MEASure[:SCALar]:CURRent:MAXimum?
FETCh[:SCALar]:CURRent:MAXimum?
Parameters None
Examples MEAS:CURR:MAX? FETC:CURR:MAX?
Returned Parameters
Related Commands MEAS:CURR:MIN?
MEASure:CURRent:MINimum?
FETCh:CURRent:MINimum?
Agilent 66312A, 66332A Only
These queries return the minimum output current reading from the measurement sample.
Query Syntax MEASure[:SCALar]:CURRent:MINimum?
FETCh[:SCALar]:CURRent:MINimum?
Parameters None
Examples MEAS:CURR:MIN? FETC:CURR:MIN?
Returned Parameters
Related Commands MEAS:CURR:MAX?