Xerox DocuColor 240-250 con Xerox FreeFlow DXP250-16179 - Manual (Page 25)

Using the lpr Utilities for DOS and UNIX Using the lpr utilities
2-7
–C"(mediaWeight=)"
Specify the paper stock weight in grams per square
meter (gsm).
Paper stock size
–C"()"
Specify the paper stock size to be used for the job. The
acceptable values are USLetter, USLegal, USLedger, a0
through a10, isob0 through isob10, and jisb0 through
jisb10.
Paper type
–C"(prefinish=)"
Set the paper type to Plain, PlainDrilled, Drilled,
PlainPreCutTab , PreCutTab ,
DrilledPreCutTab , Transparency,
DrilledTransparency, DrilledFullCutTab, FullCutTab, or a
text string for a custom paper type. Modulus is optional for
a custom paper type.
If no modulus is specified, the modulus will default to 1.
PDL type
–C"()"
Specify the format of the document. Accepted values are
ps or postscript for PostScript, pcl for HP PCL, pdf, ascii,
or tiff.
This option is only necessary if you want to print your
document in a PDL other than the one in which it was
created.
Recipient name
–C"(recipient=)"
Specify the name of the person to receive the job.
Reprint
–C"(reprint)"
Reprint a saved job. You may override the copy count of
the saved job ticket. If the reprint command is sent by a
user different from the user who originally saved the job,
the sender name is overridden by the new sender. For
example:
lpr -P ps1 -C"(reprint)" -#5 test.ps