Konica Minolta MAGICOLOR 4695MF - Manual (Page 504)

Configuring the Printer 480
The Network - SNMP window allows you to configure the following items:
Item Description
SNMP SNMP If Enable is selected, SNMP is enabled.
Choices: Enable, Disable
Default: Enable
Configuration Menu Equivalent:
UTILITY - ADMIN. MANAGEMENT -
NETWORK SETTING - SNMP
SNMP v1/
v2c(IP) If Enable is selected, SNMP v1/v2c(IP) is enabled.
Choices: Enable, Disable
Default: Enable
SNMP
v3(IP) If Enable is selected, SNMP v3(IP) is enabled.
Choices: Enable, Disable
Default: Enable
SNMP
v1(IPX) If Enable is selected, SNMP v1(IPX) is enabled.
Choices: Enable, Disable
Default: Enable
"
In order for this parameter to be available,
NetWare Print in the Network - NetWare
page must be set to Enable.
UDP Port Specifies the UDP port number.
Range: 1 - 65535
Default: 161
"
The numbers 427 and 500 cannot be
specified.
SNMP v1/
v2c/(IP) Read
Commu-
nity Name Specifies the community name to be used for scan-
ning.
Range: Up to 15 characters
Default: public
Write If Enable is selected, Write is enabled.
Choices: Enable, Disable
Default: Enable
Write
Commu-
nity Name Specifies the community name to be used for read-
ing and writing.
Range: Up to 15 characters
Default: private