Konica Minolta MAGICOLOR 4695MF - Manual (Page 298)

Network Printing 274
If the bit number differs between the server operating
system and client operating system
If the bit number differs between the print server's running operating system
and client computer's running operating system while Windows Server 2008
is running on the print server, the additional driver may not be installed cor-
rectly on the print server.
To solve this problem, specify the setup information file (ntprint.inf) of the
operating system with a different bit number when installing the additional
driver on the print server.
The following describes how to install the additional driver by specifying a
setup information file in a different computer from that the print server.
"
Before starting this procedure, prepare to configure a different client
computer from that of the print server and install the operating system
that has a bit number different from that of the print server.
"
On the print server side, the system drive of the client computer is
assigned as the network drive. Configure the setting to share the drive
to be assigned in advance.