Konica Minolta MAGICOLOR 4695MF - Manual (Page 473)

Configuring the Printer 449
Item Description
Access Permis-
sion Address If Enable is selected, the range of IP addresses permitted
access to the printer can be specified.
A maximum of five ranges of permitted IP addresses can
be specified. In addition, access from an IP address out of
the specified range is prohibited.
If Disable is selected, the permitted access setting is
disabled.
Choices: Enable, Disable
Default: Disable
Configuration Menu Equivalent:
UTILITY - ADMIN. MANAGEMENT -
NETWORK SETTING - IP ADDR. FILTER -
ACCESS PER.
Range of IP
address permit-
ted access* Specify the range of IP addresses permitted access to the
printer. Type the IP address at the beginning of the range
into the box on the left, and the IP address at the end of
the range into the box on the right.
Range: 0-255 for each xxx triplet
Default: 0.0.0.0
"
To specify a single IP address, type the same IP
address into both the box for the starting IP address
and for the ending IP address, or type “0.0.0.0” into
the box for either the starting IP address or the
ending IP address.
"
If the starting IP address is larger than the ending
IP address, the setting is not applied.