Using the network setting menu options, Tcp/ip, Ip addr. setting – Konica Minolta MAGICOLOR 4695MF User Manual
Page 259: Using the network setting menu options 235, Tcp/ip 235 ip addr. setting 235
NETWORK SETTING Menu
235
Using the Network Setting Menu Options
If the printer is connected to a network, the following settings should be spec-
ified. For details about each setting, contact your network administrator.
"
To manually specify settings for the IP address, subnet mask and
gateway, set
IP ADDR. SETTING
to
SPECIFY
.
"
When entering the IP address, do not enter a class D (between
224.0.0.0 and 239.255.255.255) or class E (between 240.0.0.0 and
255.255.255.255) IP address.
In addition, “255” cannot be entered as the last three digits of the IP
address.
TCP/IP
IP ADDR. SETTING
Purpose
Enables or disables TCP/IP.
If
ENABLE
is selected, TCP/IP is enabled.
If
DISABLE
is selected, TCP/IP is disabled.
Options
DISABLE/ENABLE
Default
ENABLE
Purpose
Sets the IP address of this printer on the network.
Sets the subnet mask of the network. The subnet mask
allows you to limit access to your printer (for example,
according to departmental divisions).
Sets the address of the router/gateway when a router/gate-
way is used on your network and you allow users outside
your network environment to print on your printer.
Options
AUTO/SPECIFY
Default
AUTO
(If IP ADDR. SETTING is set to SPECIFY)
IP ADDRESS: 0.0.0.0
SUBNET MASK: 255.255.255.0
GATEWAY: 0.0.0.0