beautypg.com

Tcp/ip, Tcp/ip 439, Configuring the printer 439 – Konica Minolta MAGICOLOR 4695MF User Manual

Page 463

background image

Configuring the Printer

439

TCP/IP

TCP/IP (shown previous)
The Network - TCP/IP - TCP/IP window allows you to configure the following
items. For more information on these TCP/IP, see chapter 9, “Network Print-
ing.”

Item

Description

TCP/IP

Select whether or not to make a connection via TCP/IP.

Choices: Enable, Disable
Default: Enable
Configuration Menu Equivalent:

UTILITY - ADMIN. MANAGEMENT -

NETWORK SETTING - TCP/IP

Speed

Specifies the operating mode and speed for Ethernet.

Choices: Auto, 10Base-T(Half), 10Base-T(Full),

100Base-TX(Half), 100Base-TX(Full),
1000Base-T(Full)

Default: Auto
Configuration Menu Equivalent:

UTILITY- ADMIN. MANAGEMENT -

NETWORK SETTING - SPEED/DUPLEX

LPD

Select whether or not LPD is used.

Choices: Enable, Disable
Default: Enable

SLP

Select whether or not SLP is used.

Choices: Enable, Disable
Default: Enable
Configuration Menu Equivalent:

UTILITY- ADMIN. MANAGEMENT -

NETWORK SETTING - SLP

Apply button

Applies the configuration settings for this window.

Clear button

Resets all configuration settings to previous values.