Konica Minolta bizhub C353 - Manual (Page 75)

C353 2-60
Administrator Operations 2
4
Enter the 20-digit HDD Lock Password from the keyboard and keypad.
– Press the [C] key to clear all characters.
– Touch [Delete] to delete the last character entered.
– Touch [Shift] to show the upper case/symbol screen.
– Touch [Cancel] to go back to the HDD Settings screen.
5
Touch [OK].
? What happens if the HDD Lock Password entered does not meet the requirements of Password
Rules?
% If the HDD Lock Password entered does not comply with the Password Rules, a message appears
that tells that the HDD Lock Password entered cannot be used. Enter the correct HDD Lock
Password. For details of Password Rules, see
"Password Rules" on page 1-8 .
6
To prevent entry of a wrong password, enter the 20-digit HDD Lock Password once again.
– Press the [C] key to clear all characters.
– Touch [Delete] to delete the last character entered.
– Touch [Shift] to show the upper case/symbol screen.
– Touch [Cancel] to go back to the HDD Settings screen.
7
Touch [OK].
? What happens if there is a mismatch in the HDD Lock Passwords?
% If there is a mismatch in the HDD Lock Passwords, a message appears that tells that there is a
mismatch in the HDD Lock Passwords. Perform steps 4 through 7 once again.