Konica Minolta bizhub PRO C500 - Manual (Page 59)

Scan With the bizhub PRO C500
IC-301 Print Controller for the bishub PRO C500 Printer 53
6. On the touch screen keyboard, type a name for the scan box: training .
7. Touch OK .
8. Touch Box No .
9. On the control panel’s keypad, type a number for the scan box: 1234 .
10. On the touch screen, touch Entry . If you touch OK only a temporary scan box
will be created.
Step 2: Scanning the Original
To scan originals:
1. Place the printout of the job Pencils_Letter face down on the platen glass.
2. On the control panel, press the S CAN key.
3. On the touch screen, touch the HDD tab.
4. Touch the scan box that you created in step 1.
5. Touch OK .
6. Touch File Name .
7. Press Input key indicate .
8. On the control panel’s keypad, type a name for the scanned file: pencils .
9. On the touch screen, touch OK .
10. Touch OK .
11. Select the required parameters for your scan.
12. On the control panel, press the Start button.
The bizhub PRO C500 printer scans the file.
Step 3: Retrieving and Saving the Scanned File
You can retrieve scanned files from the server or from any computer connected to
the network.
Note: You can place up to 100 originals on the manual feeder tray.
For information on how to set image parameters, see the bizhub PRO C500 user guide.
Note: To perform this step, you need to have Remote Scanning Application installed in the
computer.