Konica Minolta bizhub C31P - Manual (Page 88)

Configuration Menu Overview 74
"
All factory default values are shown in bold.
JOB
TIME-
OUT Settings 5 seconds-15 seconds-300 seconds
Specify the timeout interval for a print job being received.
ETHER-
NET TCP/IP ENABLE Settings YES/NO
If YES is selected, TCP/IP is enabled.
If NO is selected, TCP/IP is disabled.
IP
ADDRESS Setting 000.000.000.000
Set the IP address for this printer on the
network.
Use the , , , and keys to
specify the value.
If the IP address is manually specified,
DHCP , BOOTP and ARP/PING are
automatically set to OFF .
SUBNET
MASK Setting 000.000.000.000
Specify the subnet mask for the network.
Use the , , , and keys to
specify the value.
DEFAULT
GATEWAY Setting 000.000.000.000
Specify the IP address of the router if
one is on the network. Use the , ,
, and keys to specify the value.
DHCP Settings ON/OFF
Select whether or not the IP address is
automatically acquired.
If ON is selected, the IP address is auto-
matically acquired.
If OFF is selected, the IP address is not
automatically acquired.