Konica Minolta bizhub C31P - Manual (Page 233)

Status, Error, and Service Messages 219
Status, Error, and Service Messages
Status, error, and service messages are displayed in the control panel mes-
sage window. They provide information about your printer and help you locate
many problems. When the condition associated with a displayed message
has changed, the message is cleared from the window.
Standard Status Messages
This message... means... do this...
CALIBRATING After replacing a toner car-
tridge or a print unit, or after
rebooting your printer after
environmental changes,
your printer automatically
pauses to do an Auto-Image
Density Control (AIDC)
cycle. This process is pro-
vided to make reliable
printer operation with opti-
mum output quality possible. No action needed.
CANCELLING JOB The job is being cancelled.
COPYING The printer is printing with
the collating function.
ENERGY SAVER The printer is in Energy
Saver mode to reduce
power consumption during
periods of inactivity. When a
print job is received, the
printer returns to normal
power after warming up.
FIRMWARE UPDATE The firmware is being
updated.
INITIALIZING The printer is being initial-
ized.
PRINTING The printer is printing.
PROCESSING The printer is processing
data.
READY The printer is on and ready
to receive data.