beautypg.com

Staple finisher (case 3), Staple finisher (case 3) 200 – Konica Minolta bizhub C31P User Manual

Page 214

background image

Clearing Media Misfeeds

200

Staple Finisher (Case 3)

If the media misfeed occurred in the center section of the staple finisher, fol-
low the procedure described below to remove the misfed media.

1

Open the finisher cover.

2

Clockwise turn the knob on the
inside until the media is fed into
the main output tray.

3

When the media is fed into the
main output tray, lift up the sub
output tray, and then slowly pull
out the media.