Konica Minolta bizhub C31P - Manual (Page 250)

Hard Disk Kit 236
Hard Disk Kit
If a hard disk kit is installed, fonts can be downloaded and saved, and the
overlay function can be used.
Installing the Hard Disk kit
Note
It’s very important to protect the printer controller board and any
associated circuit boards from electrostatic damage. Before performing
this procedure, review the antistatic caution on page 232. In addition,
always handle circuit boards by the edges only.
1
Turn off the printer and discon-
nect the power cord and inter-
face cables.
2
Using a screwdriver, remove the
screw. Then, slide the rear cover
to the right and remove it.