Konica Minolta bizhub C31P - Manual (Page 171)

Replacing Consumables 157
Replacing the Transfer Belt Unit
When the time to replace the transfer belt unit is reached, the message
TRANS. BELT/END OF LIFE appears. Printing can continue even after
this message appears; however, since the print quality is reduced, the trans-
fer belt unit should be replaced immediately.
1
Open the printer’s front cover.
2
Remove the print unit and waste
toner bottle.
"
For details on removing
the print unit or waste
toner bottle, refer to
“Replacing a Print Unit”
on page 144 or “Replac-
ing the Waste Toner Bot-
tle” on page 150.
"
Cover the removed print
unit to protect it from
direct sunlight.