Konica Minolta bizhub C31P - Manual (Page 32)

Using the Postscript and PCL Printer Driver 18
„ Specify the size of the original document
„ Select the output media size
„ Zoom (expand/reduce) documents
„ Specify the paper source
„ Specify the type of media
„ Save a print job on the printer and print it later (Job Retention)
„ Save a confidential job on the printer and protect it with a password
„ Print a single copy for proofing
„ Specify user settings (job name for stored job printing and password for
secured job printing)
„ Specify user authentication and account track settings
„ Specify the number of copies
„ Turn on/off job collation
„ Turn on/off offset
„ Print on the back side of paper that has already been printed on
"
Use paper that has been printed on with this printer.
In addition, the page printed with this setting is not guaranteed.
"
Do not use the following types of paper.
- Paper that has been printed on with an inkjet printer
- Paper that has been printed on with a monochrome/color lase
printer/copier
- Paper that has been printed on with any other printer or fax machine
Layout Tab
The Layout Tab allows you to
„ Print several pages of a document on the same page (N-up printing)
„ Print a single copy for enlargement and print several pages (PCL printer
driver only)
„ Rotate the print image 180 degrees
„ Specify whether or not blank pages are printed (PCL printer driver only)
„ Specify duplex (double-sided) printing
„ Specify booklet printing
„ Specify the position on the paper where the document is to be printed
„ Adjust the binding margin (PCL printer driver only)
„ Adjust the printing position (PCL printer driver only)