Konica Minolta bizhub C31P - Manual (Page 149)

Finishing 135
Offset Printing
If offset printing is selected, the paper is fed out shifted as shown below.
"
When PAPER MENU/COLLATE is set to ON , the pages are fed out
in sets as shown below.
Staple printing
Pages are stapled and fed out by job or by copy set as shown below.
Page in the portrait orientation are stapled in the upper-left corner.
"
The copies can be stapled when they contain 2 to 30 pages (3 to 60
pages when double-sided).
"
If staple printing is selected when COLLATE is set to ON , the pages
are stapled before being fed out. If staple printing is selected when
COLLATE is set to OFF , the pages are not stapled before being fed
out (except when only one copy is being printed).
"
When copies are stapled, they are not fed out shifted as with offset
printing or job separation printing. Instead, they are fed out at the
same position.
- When COLLATE is set to ON - When COLLATE is set to OFF
3
2
1
3
2
1
3
2
1
3
3
3
2
2
2
1
1
1
1