Konica Minolta bizhub C31P - Manual (Page 241)

Status, Error, and Service Messages 227
I-UNIT END
REPLACE
X The X Print unit has
completely reached
the end of its life. Replace the Print unit.
I-UNIT MISSING
CHECK X The X print unit is not
installed, or an unap-
proved print unit is
installed. Install a correct KONICA
MINOLTA print unit.
STAPLER EMPTY
REPLACE STAPLE
CARTRIDGE The staples are
empty when an
attempt was made to
print a staple job. Replace the staple car-
tridge.
TONER OUT
REPLACE X The X toner cartridge
is completely empty. Replace the toner car-
tridge.
TONER MISSING
CHECK X The X toner cartridge
is not installed, or an
unapproved toner
cartridge is installed. Install a correct KONICA
MINOLTA toner car-
tridge.
TRAY X EMPTY
“SIZE”
“MEDIA” The X (Tray 1, 2, 3 or
4) was specified with
the printer driver for
printing, but Tray X is
empty. This message
appears when the
PAPER MENU/
PAPER SOURCE/
TRAY CHAINING
menu is set to OFF .
Load the correct media
into the specified tray.
TRAYX PAPER ERR
“SIZE”
“MEDIA” The media size/type
set in the printer
driver is different from
the size/type of media
loaded. This message
appears when the
PAPER MENU/
PAPER SOURCE/
TRAY CHAINING
menu is set to OFF .
Load the correct media
size and type.
This message... means... do this...