Konica Minolta bizhub C31P - Manual (Page 58)

Configuration Menu Overview 44
TRAY
MAPPING TRAY
MAPPING
MODE Settings ON/OFF
Select whether or not the Tray Mapping
function is used.
LOGICAL
TRAY
0-9 Settings PHYSICAL TRAY1/
PHYSICAL TRAY2/
PHYSICAL TRAY3/
PHYSICAL TRAY4
Select the tray that is used for printing
when a print job is received from another
manufacturer’s printer driver.
The default setting for LOGICAL
TRAY 1 is PHYSICAL TRAY1 . The
default setting for all other trays is PHYS-
ICAL TRAY2 .
"
PHYSICAL TRAY3 and
PHYSICAL TRAY4 appear only if
an optional lower feeder unit is
installed.
DUPLEX Settings OFF/LONG EDGE/SHORT EDGE
If LONG EDGE is selected, the pages will be printed on both sides
of the paper for long-edge binding.
If SHORT EDGE is selected, the pages will be printed on both
sides of the paper for short-edge binding.
The setting specified in the printer driver will override this menu
setting.
COPIES Settings 1-9999
Specify the number of copies to be printed.
The setting specified in the printer driver will override this menu
setting.
COLLATE Settings ON/OFF
If ON is selected, all pages of the document are printed before the
next copy is printed.
If OFF is selected, all copies of the document are not printed
separately.
The setting specified in the printer driver will override this menu
setting.