Konica Minolta bizhub C20X - Manual (Page 99)

Error Messages on the Message Window 93
Error Messages on the Message Window
Error message Cause Solution
ADMINISTERED BY
PC
PLEASE WAIT!
This machine is access-
ing LSU or the Admin.
Mode of PageScope
Web Connection. „ Log off from PageScope Web
Connection.
„ Exit LSU.
„ If no operation is performed for
600 seconds, the main screen
appears.
COMMUNICATION
ERROR (####)
„ Communication is not
possible because of
some problem in the
machine.
„ Communication is not
possible because of a
problem with the
recipient/caller’s fax
machine.
Check the transmission results.
Check Fax Mode
A fax error occurred
while an operation was
being performed in Copy
mode or Scan mode. Press the Fax key to check the
error condition, and take appro-
priate measures.
FAX DATA LOST
Data stored in the mem-
ory has been erased. Check the printed lost data
report. If transmission data was
erased, scan the transmission
data again. If received data was
erased, have the fax sent again.
HUNG UP THE PHONE
The receiver of the con-
nected telephone is
lifted. Replace the receiver of the con-
nected telephone on the hook.
LINE PROBLEM
CHECK LINE
„ The telephone dialing
system or telephone
wiring system is not
set correctly.
„ The telephone cable
is not attached cor-
rectly.
„ Check the telephone dialing
system or telephone wiring
system and use the appropri-
ate configuration menu to
make the correct settings.
„ Correctly connect the tele-
phone cable.