Konica Minolta bizhub C20X - Manual (Page 100)

Error Messages on the Message Window 94
MEMORY FILE FULL
„ The number of items
registered in the
memory has
exceeded the maxi-
mum allowed. „ If MEMORY RX MODE is set to
ON
, cancel memory reception
mode, and print received doc-
uments stored in the memory.
MEMORY FULL
„ While sending a fax,
the size of the data for
the scanned image
has exceeded the
capacity of the mem-
ory.
„ While receiving a fax,
the size of the data for
the scanned image
has exceeded the
capacity of the mem-
ory.
„ If MEMORY RX MODE is set to
ON
, cancel memory reception
mode, and print received doc-
uments stored in the memory.
„ Send the fax manually.
REDIAL ALL FAILED
All redial attempts failed
because either the recip-
ient’s line is busy or
there was no answer. Check the condition of the recipi-
ent’s line, and then try sending
the fax again.
Error message Cause Solution