Utility menu 24 – Konica Minolta bizhub C20X User Manual
Page 30
Utility Menu
24
COMM.
SETTING
TONE/
PULSE
Settings
TONE
/ PULSE
Select the dialing system. If this parameter is
not correctly set to the type of dialing system
used, faxes cannot be sent and received.
Select the correct setting after checking which
type of dialing system is used by your tele-
phone line.
"
If PTT SETTING in the USER SETTING
menu is set to U.S.A, CANADA or NEW
ZEALAND
, the settings cannot be
changed.
LINE
MONITOR
Settings
OFF / LOW / HIGH
Select the volume of the monitoring sound of
the transmission signal.
"
Even when OFF is selected, the
monitoring sound can be heard when the
On hook key is pressed.
PSTN/PBX
Settings
PSTN
/ PBX
Select either PSTN or PBX, depending on the
environment being used.
PSTN: Select this setting if there is no tele-
phone switchboard in the environment being
used.
PBX: Select this setting if there is a tele-
phone switchboard in the environment being
used or if an internal phone system is used.
If PBX is selected, specify the outside line
access number.