Konica Minolta bizhub C20X - Manual (Page 37)

Utility Menu 31
RX PRINT
Settings
MEMORY RX / PRINT RX
Select whether the fax is printed only after all
document pages have been received or printing
begins as soon as the first page of the docu-
ment is received.
„ MEMORY RX : Printing begins after all
pages have been received.
„ PRINT RX : Printing begins after the first
page has been received.
RX MODE
Settings
AUTO RX / MANUAL RX
Select whether the reception mode is set to
automatic reception or manual reception.
„ AUTO RX : Automatically begins receiving
the fax after the set number of rings.
„ MANUAL RX : Does not automatically
receive the fax. Reception begins after
making a connection by picking up the
telephone receiver or pressing the On
hook key, then pressing the Start key.
For details on manual reception, refer to
“Receiving Faxes Manually” on page 66.
FORWARD
Settings
OFF / ON / ON (PRINT)
Select whether or not to forward received fax
documents.
„ OFF : Select this setting to not forward the
document.
„ ON : Select this setting to forward the
received fax document to the specified
fax number or e-mail address.
„ ON (PRINT) : Select this setting to for-
ward the received fax document to the
specified fax number or e-mail address at
the same time that the machine prints it.
For details on specifying settings, refer to
“Specifying Forwarding Settings” on page 36.
FOOTER
Settings
OFF / ON
Select whether or not the reception information
(date received, number of pages, etc.) is
printed at the bottom of each received docu-
ment.