Speed dialing, Registering a speed dial destination, Speed dialing 78 – Konica Minolta bizhub C20X User Manual
Page 84: Registering a speed dial destination 78
Speed Dialing
78
"
To return to the Fax mode screen, press the Back key until the Fax
mode screen appears, or press the Stop/Reset key.
Speed Dialing
Registering a Speed Dial Destination
Frequently specified fax numbers (maximum of 220) can be registered as
speed dial destinations. In addition, batch transmission settings can be spec-
ified.
1
Press the + or , key to select UTILITY, and then press the Select key.
2
Press the + or , key to select DIAL REGISTER, and then press the
Select key.
3
Press the + or , key to select SPEED DIAL, and then press the Select
key.
The SPEED DIAL screen appears.
4
Use the keypad to type in the speed dial number(1-220), and then press
the Select key.
"
If LDAP search settings have been specified, a screen allowing MAN-
UAL SETTING
or LDAP SEARCH to be selected appears after the
Select key is pressed. Select
MANUAL SETTING
, and then press
the Select key
"
For details on entering/editing numbers, refer to “Entering Text” on
page 97.
"
If the destination is already registered with the specified speed dial
number, REGISTERED! appears. Press the Back key to return to the
DIAL REGISTER screen, and then continue with step 3.
5
Enter the name of the speed dial destination to be registered, and then
press the Select key.
"
Text up to 20 characters long can be entered for the name.
"
For details on entering/editing text and the characters that can be
entered, refer to “Entering Text” on page 97.
6
Use the keypad to enter the fax number of the recipient.
"
The fax number can contain a maximum of 50 characters.
"
For details on entering/editing numbers, refer to “Entering Text” on
page 97.