Konica Minolta bizhub C20X - Manual (Page 91)

About the Reports and Lists 85
1
Press the + or , key to select REPORTS/STATUS, and then press the
Select key.
2
Press the + or , key to select TX/RX RESULT, and then press the Select
key.
The TX/RX RESULT screen appears and displays the communications
log.
"
To return to the Fax mode screen, press the Select key.
About the Reports and Lists
Reports on the status of fax transmissions/receptions and the speed dial set-
tings can be printed.
The following reports and lists can be printed with this machine.
"
For details on printing the reports and the lists, refer to the following
section.
Printing the Reports and Lists
1
Press the + or , key to select REPORTS/STATUS, and then press the
Select key.
2
Press the + or , key to select REPORT, and then press the Select key.
3
Press the + or , key to select the desired report, press the Select key,
and then Start key.
The report is printed
TX RESULT REPORT
The session number, recipient name, date sent, starting time of transmission,
number of document pages, time required, mode, and transmission result are
printed.
"
The machine can also be set to print this report with each transmis-
sion, only when an error occurs, or not at all. For details, refer to
“REPORTING” on page 33.
SESSION FUNCTION NO. DESTINATION
STATION
DATE TIME PAGE DURATION MODE RESULT
0001 TX 001 AAA NEWYORK
012345678 APR.19 18:00 010 00h02min21s G3 STOP
00A0: TX CANCEL