Konica Minolta bizhub C20X User Manual
Page 87
Group Dialing
81
5
Enter the name of the group dial destination to be registered, and then
press the Select key.
"
Text up to 20 characters long can be entered for the name.
"
For details on entering/editing text and the characters that can be
entered, refer to “Entering Text” on page 97.
6
Use the keypad to type in the speed dial number to be registered with the
group dial destination, and then press the Select key.
"
To program a group dial number registered with a group dial destina-
tion, press the Addressbook key, type in the group dial number and
then press the Select key.
"
For details on entering/editing text and the characters that can be
entered, refer to “Entering Text” on page 97.
7
Press the Select key again.
8
Check that ADD is selected, and then press the Select key. Repeat steps
6 through 8 until all desired destinations are specified.
–
If no more recipients are to be specified, continue with step 9.
9
Select FINISH, and then press the Select key.
The destinations are registered as the group dial destination.
"
To return to the Fax mode screen, press the Back key until the Fax
mode screen appears, or press the Stop/Reset key.