beautypg.com

Konica Minolta bizhub C20X User Manual

Page 56

background image

Sending a Fax at a Specified Time (Timer Transmission)

50

Sending a Fax at a Specified Time (Timer

Transmission)

A document can be scanned and stored in memory to be sent at a specified
time. This feature is convenient for sending faxes at discounted calling times.

"

When sending multiple documents together to a single destination at a
specified time, batch transmission is useful since only a single con-
nection is required.

"

If the machine is not programmed with the current time, the fax cannot
be sent at the specified time. For details on specifying the time, refer
to “ADMIN. MANAGEMENT” on page 23.

"

Timer transmission can be combined with broadcast transmission.

1

Position the document to be faxed.

2

If desired, adjust the image quality.

"

The document image quality can be adjusted. For details, refer to
“Adjusting the Image Quality” on page 42.

3

Press the + or , key to select TIMER TX, and then press the Select key.
The TIMER TX SETTING screen appears.

4

Using the keypad, enter the desired transmission time, and then press the
Select key.

"

The time is set in the 24-hour format.

"

If you want to correct the time, press the Back key, and then enter the
correct time.

5

Specify the fax number of the recipient.

"

Refer to “Specifying a Recipient” on page 43.

"

To send a broadcast transmission to multiple destinations, refer to
“Sending a Fax to Multiple Recipients (Broadcast Transmission)” on
page 47. Af
ter all recipients have been specified, press the Start key
to begin scanning. After scanning is finished, the machine with enter a
standby state.

"

If the specified speed dial number is registered with batch transmis-
sion settings, the fax will be sent at the time specified for the batch
transmission.

This manual is related to the following products: