Konica Minolta bizhub C20X - Manual (Page 42)

Specifying Settings in Utility Menu 36
Turning Off the Memory RX Mode
1
Press the + or , key to select UTILITY, and then press the Select key.
2
Press the + or , key to select FAX RX OPERATION, and then press the
Select key.
3
Check that MEMORY RX MODE is selected, and then press the Select key.
4
Using the + or , keys, select OFF , and then press the Select key.
The password input box appears.
"
If no password was specified, memory reception mode is canceled.
5
Enter the password, and then press the Select key.
Memory reception mode is canceled.
"
If faxes are saved in memory, printing of the faxes begins.
Specifying Forwarding Settings
1
Press the + or , key to select UTILITY, and then press the Select key.
2
Press the + or , key to select FAX RX OPERATION, and then press the
Select key.
3
Press the + or , key to select FORWARD, and then press the Select key.
The FORWARD setting appears.
4
Press the + or , key to select ON or ON (PRINT), and then press the
Select key.
5
Enter the destination, or select from the speed dial destinations.
"
To select from the speed dial destinations, press the Address-
book key, type in the speed dial number, and then press the
Select key.
"
An e-mail address can also be specified.
6
Press the Select key.
The forwarding settings are specified.