Setting up the memory rx mode, Setting up the memory rx mode 35 – Konica Minolta bizhub C20X User Manual
Page 41
Specifying Settings in Utility Menu
35
Setting Up the Memory RX Mode
1
Press the + or , key to select UTILITY, and then press the Select key.
2
Press the + or , key to select FAX RX OPERATION, and then press the
Select key.
3
Check that MEMORY RX MODE is selected, and then press the Select key.
4
Using the + or , keys, select
ON
, and then press the Select key.
5
Use the keypad to type in the time when memory reception mode begins,
and then press the Select key.
The ending time input box appears.
"
To specify no start time, press the Select key without specifying a
time.The password input box appears. Continue with step 7.
6
Use the keypad to type in the time when memory reception mode ends,
and then press the Select key.
The password input box appears.
7
Enter the password, and then press the Select key.
Memory reception mode is set.
"
The password is required for turning off memory reception mode or
changing the start/end times. Enter a 4-digit number.
"
To specify no password, press the Select key without specifying a
password.