5 setting the ic card information, Setting the ic card information -10 – Konica Minolta bizhub 42 User Manual
Page 91
bizhub 42/36
4-10
4.1
PageScope Data Administrator
4
4.1.5
Setting the IC card information
0
The IC card driver (USB driver) of the IC card reader and the IC card plug-in must be installed in the PC
of the Administrator of the machine in advance. For details, refer to the User’s Guide furnished with the
machine.
0
For the procedure to access the machine, see steps 1 through 5 of page 4-2.
0
Do not leave the site while you are gaining access to the machine through PageScope Data Adminis-
trator. If it is absolutely necessary to leave the site, be sure first to log off from the PageScope Data
Administrator.
1
Access the machine through [Authentication Settings/Address Settings] mode of PageScope Data Ad-
ministrator.
2
Click the Authentication settings expand button.
3
Select [User authentication settings] and click [Add].
4
Click [OK].
5
Enter the user name and password, and select the [IC card authentication] tab.