Konica Minolta bizhub 42 - Manual (Page 46)

bizhub 42/36 2-31
2.11 SNMP Setting Function 2
2.11 SNMP Setting Function
When access to the machine by the Administrator of the machine through the Admin Settings is authenticat-
ed, the machine enables changing of the SNMP v3 Write User Password (auth-password, priv-password) re-
quired for accessing the MIB object over the network using the SNMP from the PC.
Each of the auth-password and priv-password can consist of 8 to 32 digits. The password entered for the
authentication purpose appears as "
●" on the display.
2.11.1 Changing the auth-password and priv-password
0 For the procedure to access the Admin Mode, see page 2-2.
0 Do not leave the machine with the Admin Mode setting screen left shown on the display. If it is abso-
lutely necessary to leave the machine, be sure first to log off from the Admin Mode.
1
Start PageScope Web Connection and access the Admin Mode.
2
Click the [Network] tab and [SNMP Settings].
3
Click the [Change Password] check box and enter the auth-password and priv-password in the boxes
marked by the rectangle, that is, the Write side SNMP v3 Setting.
% The default setting of auth-password and priv-password is the MAC address set in the machine.
4
Click [Apply].
% If the entered auth-password or priv-password does not meet the requirements of the Password
Rules, a message that tells that the entered auth-password or priv-password cannot be used ap-
pears. Enter the correct auth-password or priv-password. For details of the Password Rules, see
page 1-9.