Konica Minolta bizhub 42 - Manual (Page 67)

bizhub 42/36 3-13
3.2 ID & Print Function 3
5
Enter the user name and password and then click [OK].
% If the user password does not correspond to the user name entered, the ID & Print file is discarded
without being registered.
% If an attempt is made to print or save a file by specifying a user name that contains ["] (a double
quotation mark), a login error results and the machine cancels the print job.
% A failure in authentication as a result of the entry of a wrong password is counted as unauthorized
access. If the cumulative number of unauthorized accesses reaches three during operation of the
machine, the machine is set into an access lock state and prohibits any subsequent password entry
operations. To cancel the access lock state, turn off, then on, the power switch of the machine.
When the power switch is turned off, then on again, wait at least 10 seconds to turn it on after turn-
ing it off. This interval is necessary to ensure that the machine functions properly.
6
Print the document.