Konica Minolta bizhub 42 - Manual (Page 53)

bizhub 42/36 2-38
2.16 AppleTalk Setting Function 2
2.16 AppleTalk Setting Function
When access to the machine by the Administrator of the machine through the Admin Settings is authenticat-
ed, the machine enables making of the AppleTalk Settings.
Making the AppleTalk Setting
0 For the procedure to call the Ethernet screen on the display, see steps 1 through 3 of page 2-35.
0 Do not leave the machine with the setting screen of Admin Settings left shown on the display. If it is
absolutely necessary to leave the machine, be sure first to log off from the Admin Settings.
1
Call the Ethernet screen on the display from the control panel.
2
Touch [AppleTalk].
3
Touch [Enable] and touch [OK].
4
Touch [Close].
0 For the procedure to access the Admin Mode, see page 2-2.
0 Do not leave the machine with the Admin Mode setting screen left shown on the display. If it is abso-
lutely necessary to leave the machine, be sure first to log off from the Admin Mode.
1
Start PageScope Web Connection and access the Admin Mode.
2
Click the [Network] tab and [AppleTalk Settings].
3
Make the necessary settings.
4
Click [Apply].