Konica Minolta bizhub 42 - Manual (Page 44)

bizhub 42/36 2-29
2.10 SSL Setting Function 2
2.10.2 SSL Setting
0 For the procedure to access the Admin Mode, see page 2-2.
0 Do not leave the machine with the Admin Mode setting screen left shown on the display. If it is abso-
lutely necessary to leave the machine, be sure first to log off from the Admin Mode.
NOTICE
When making the SSL Setting, be sure to make sure in advance that the device certificate has been registered
in the machine. For the procedure to register the device certificate, see page 2-27.
1
Start PageScope Web Connection and access the Admin Mode.
2
Click the [Security] tab and [SSL/TLS Settings] from [PKI Settings] menu.
3
Set "Encryption Strength" and click [Apply].
% For encryption strength, select the strong "AES-256, 3DES."
% In the Enhanced Security Mode, the setting cannot be changed to one containing strength lower
than AES/3DES.