Konica Minolta bizhub 42 - Manual (Page 18)

bizhub 42/36 2-3
2.1 Accessing the Admin Settings 2
4
Enter the 8-digit Administrator Password from the keyboard or keypad.
% Press the [C] key to clear all characters.
% Touch [Delete] to delete the last character entered.
% Touch [ ↑] to show the upper case screen.
% Touch [!#?/] to show the symbol screen.
5
Touch [OK].
% If a wrong Administrator Password is entered, a message that tells that the authentication has failed
appears. Enter the correct Administrator Password.
% A failure in authentication as a result of the entry of a wrong password is counted as unauthorized
access. If the cumulative number of unauthorized accesses reaches three during operation of the
machine, the machine is set into an access lock state and prohibits any subsequent password entry
operations. To cancel the access lock state, turn off, then on, the power switch of the machine.
When the power switch is turned off, then on again, wait at least 10 seconds to turn it on after turn-
ing it off. This interval is necessary to ensure that the machine functions properly.
6
Press the [Reset] key to log off from the Admin Settings.