Konica Minolta magicolor 7450 II grafx - Manual (Page 56)

Configuration Menu Overview 42
TRAY
MAPPING
TRAY
MAPPING
MODE
Settings
ON/OFF
If ON is selected, logical tray 0 through 9
can be selected and the assigned tray of
this printer can be used.
If OFF is selected, a logical tray cannot
be used.
This setting is used to link a tray setting
specified from a third-party printer driver
with trays on this printer.
LOGICAL
TRAY 0-9
Settings
PHYSICAL TRAY1-5
The physical tray assigned to each
logical tray can be specified.
"
The default setting for LOGICAL
TRAY 0 is PHYSICAL TRAY2 .
The default setting for all other
trays is
PHYSICAL TRAY1 .
"
PHYSICAL TRAY 3/4/5 appear
only if an optional lower feeder unit
is installed.
DUPLEX
Settings
OFF /LONG EDGE/SHORT EDGE
If LONG EDGE is selected, the pages will be printed on both sides of
the media for long-edge binding.
If SHORT EDGE is selected, the pages will be printed on both sides
of the media for short-edge binding.
The setting specified in the printer driver overrides this menu setting.
COPIES
Settings
1 -9999
Specify the number of copies to be printed.
The setting specified in the printer driver overrides this menu setting.
COLLATE
Settings
ON/OFF
If ON is selected, all pages of the document are printed before the
next copy is printed.
If OFF is selected, all copies of the document are not printed
separately.
The setting specified in the printer driver overrides this menu setting.