Konica Minolta magicolor 7450 II grafx - Manual (Page 112)

Loading Media 98
Loading Media
How do I load media?
Take off the top and bottom sheets of a
ream of media. Holding a stack of
approximately 100 sheets at a time, fan
the stack to prevent static buildup before
inserting it in a tray.
"
Do not fan transparencies.
Note
Although this printer was designed for printing on a wide range of
media types, it is not intended to print exclusively on a single media
type except plain paper. Continuous printing on media other than plain
paper (such as envelopes, labels, thick stock, or transparencies) may
adversely affect print quality or reduce engine life.
When refilling media, first remove any media remaining in the tray. Stack it
with the new media, even the edges, then reload it.
Tray 1 (Manual Feed Tray)
For details on the types and sizes of media that can be printed from Tray 1,
refer to “Media Specifications” on page 86.
Loading Plain Paper
1
Open Tray 1.