What is the guaranteed imageable (printable) area, Media types 96 – Konica Minolta magicolor 7450 II grafx User Manual
Page 110
Media Types
96
DO NOT use glossy stock that is
Mixed with any other media in Tray 1/2 (as this will cause printer misfeed-
ing)
What Is the Guaranteed Imageable (Printable) Area?
The printable area on all media sizes is
excluding 4 mm (0.157") section from
the right/left edge and 4.2 mm (0.165")
section from top/bottom edge of the
media.
Each media size has a specific imagea-
ble area, the maximum area on which
the printer can print clearly and without
distortion.
This area is subject to both hardware
limits (the physical media size and the
margins required by the printer) and software constraints (the amount of
memory available for the full-page frame buffer). The guaranteed imageable
(printable) area for all media sizes is excluding 5 mm (0.197") from the right/
left edge and 5 mm (0.197") from the top/bottom edge of the media.
"
In case of A3Wide, the printable area all media sizes is excluding
2 mm (0.079") section from right/left edge and 4.2 mm (0.165") section
from top/bottom edge of the media , and the guaranteed imageable
(printable) area for all media sizes is excluding 5 mm (0.197") section
from right/left edge and 7 mm (0.276") section from top/bottom edge of
the media.
Orientation Tray 1
(Manual Feed
Tray)
Face down
Tray 2
Face up
Tray 3/4/5
—
Driver
Media Type
Glossy
Weight
64–90 g/m² (17–24 lb)
Duplexing
Not supported
a
a
b
b
Printable
Area
a = 4 mm (0.157")
b = 4.2 mm (0.165")