Konica Minolta magicolor 7450 II grafx - Manual (Page 31)

Printer Driver Settings 17
Basic Tab
The Basic Tab allows you to
„ Specify the orientation of the media
„ Specify the size of the original document
„ Select the output media size
„ Zoom (expand/reduce) documents
„ Specify the paper source
„ Specify the type of media
„ Specify the number of copies
„ Turn on/off job collation
„ Save a print job on the printer and print it later (Job Retention)
„ Save a confidential job on the printer and protect it with a password
„ Print a single copy for proofing
„ Specify user settings (job name for stored job printing and password for
secured job printing)
„ Print on the back side of paper that has already been printed on
"
Use paper that has been printed on with this printer. In addition, the
page printed with this setting is not guaranteed.
"
Do not use the following types of paper.
– Paper that has been printed on with an inkjet printer
– Paper that has been printed on with a monochrome/color laser
printer/copier
– Paper that has been printed on with any other printer or fax
machine
Layout Tab
The Layout Tab allows you to
„ Print several pages of a document on the same page (N-up printing)
„ Specify booklet printing
„ Rotate the print image 180 degrees
„ Specify duplex (double sided) printing
„ Specify whether or not blank pages are printed (PCL printer driver only)
„ Adjust the binding margin (PCL printer driver only)
„ Adjust the printing position (PCL printer driver only)