Konica Minolta magicolor 7450 II grafx - Manual (Page 242)

Banner Tray 228
4
Insert the banner tray into Tray
1.
"
Fully insert the banner
tray until the tab on the
back of the banner tray
touches the side of Tray 1
5
Load the banner paper face
down with the end inserted into
the slot as much as possible,
and then place the other end of
the paper over the banner tray
paper guide.
"
A maximum of 10 sheets
of banner paper can be
loaded into the banner
tray.
"
In order to avoid toner smudges, do not load curled paper.
6
Slide the media guides against the edges of the banner paper.
"
Make sure that the media
guides are firmly pushed
against the left and right
sides of the banner
paper.
7
Begin printing.
"
Specify the same paper size as that specified with the custom size
settings in the printer driver.