Konica Minolta magicolor 7450 II grafx - Manual (Page 104)

Media Types 90
DO NOT use thick stock that is
„ Mixed with any other media in Tray 1 (as this will cause printer misfeed-
ing)
Envelopes
Print on the front (address) side only. Some parts of the envelope consist of
three layers of paper—the front, back, and flap. Anything printed in these lay-
ered regions may be lost or faded.
Use envelopes that are
„ Common office envelopes approved for laser printing with diagonal joints,
sharp folds and edges, and ordinary gummed flaps
"
Because the envelopes pass through heated rollers, the gummed
area on the flaps may seal. Using envelopes with emulsion-based
glue avoids this problem.
„ Approved for laser printing
„ Dry
DO NOT use envelopes that have
„ Sticky flaps
„ Tape seals, metal clasps, paper clips, fasteners, or peel-off strips for seal-
ing
„ Transparent windows
Capacity Tray 1
(Manual Feed
Tray) Up to 10 envelopes, depending on their
thickness
Tray 2 Up to 10 envelopes, depending on their
thickness
Tray 3/4/5 Not supported
Orientation Tray 1
(Manual Feed
Tray)
Face down
Tray 2 Face up
Tray 3/4/5 —
Driver
Media Type Envelope
Weight 64–163 g/m² (17–43 lb bond)
Duplexing Not supported