Duplexing, Duplexing 118 – Konica Minolta magicolor 7450 II grafx User Manual
Page 132
Duplexing
118
Duplexing
Select paper with high opacity for duplex (2-sided) printing. Opacity refers to
how effectively paper blocks out what is written on the opposite side of the
page. If the paper has low opacity (high translucency), then the printed data
from one side of the page will show through to the other side. Check your
application for margin information. For best results, print a small quantity to
make sure the opacity is acceptable.
Duplex (2-sided) printing can be done manually or can be done automatically
with the duplex option installed and selected.
Note
Only plain paper, 64–90 g/m
2
(17–24 lb bond) and thick paper,
91-256 g/m
2
(25-68.1 lb bond) can be autoduplexed. See “Media
Duplexing envelopes, labels, postcards, glossy stock or transparencies
is not supported.
How do I autoduplex?
You should verify that the duplex option is physically installed on the printer to
successfully duplex (double-sided) the job.
Check your application to determine how to set your margins for duplex (dou-
ble-sided) printing.
The following Binding Position settings are available.
"
The binding position settings are supported only PCL printer driver.
If “Short Edge (Top)” is selected, the pages will be laid out
to flip at the top.
If “Short Edge (Bottom)” is selected, the pages will be laid
out to flip at the bottom.
1
3
1
2
1
1
3
1
2
1