Konica Minolta magicolor 7450 II grafx - Manual (Page 148)

Replacing Consumables 134
14
Close the front cover.
"
If the imaging unit is not
fully inserted, the front
cover cannot be closed.
"
The printer must com-
plete a 75-second cali-
bration cycle after the
toner cartridge has been
replaced. If you open the
front cover before the
message
READY
appears, the printer stops
and repeats the calibra-
tion cycle.
Replacing the Waste Toner Bottle
When the waste toner bottle becomes full, the message WASTE TONER
FULL/REPLACE BOTTLE appears in the message window. The printer
stops and will not start again until the waste toner bottle is replaced.
1
Open the printer’s front cover.