Konica Minolta magicolor 7450 II grafx - Manual (Page 229)

Lower Feeder Unit 215
1
Turn off the printer and discon-
nect the power cord and inter-
face cables.
2
Remove the lower-right cover of
the printer, as shown in the illus-
tration.
Remove the cover by inserting
your finger into the hole at the
front of the cover, then pulling off
the cover as shown.
3
Prepare the lower feeder unit.
"
Be sure to place the
lower feeder unit on a
level surface.
"
Do not remove the tape
securing the relay har-
ness on the lower feeder
unit until the unit is con-
nected to the machine.