Konica Minolta bizhub 361 - Manual (Page 95)

501/421/361 2-78
Administrator Operations 2
4
Enter the 20-digit new Flash Memory Lock Password from the keyboard and key pad.
– Press the [C] key to clear all characters.
– Touch [Delete] to delete the last character entered.
– Touch [Shift] to show the upper case/symbol screen.
– Touch [Cancel] to go back to the Security Settings screen.
5
Touch [OK].
? What happens if the Flash Memory Lock Password entered does not meet the requirements of
Password Rules?
% If the Flash Memory Password entered does not comply with the Password Rules, a message
appears saying that the Flash Memory Password entered cannot be used. Enter the correct Flash
Memory Lock Password. For details of the Password Rules, see
"Password Rules" on page 1-9 .
6
To prevent entry of a wrong password, enter the 20-digit Flash Memory Lock Password once again.
– Press the [C] key to clear all characters.
– Touch [Delete] to delete the last character entered.
– Touch [Shift] to show the upper case/symbol screen.
– Touch [Cancel] to go back to the Security Settings screen.
7
Touch [OK].
? What happens if there is a mismatch in the Flash Memory Lock Passwords?
% If there is a mismatch in the Flash Memory Lock Passwords, a message appears saying that there
is a mismatch in the Flash Memory Lock Passwords. Perform steps 4 to 6 once again.