Konica Minolta bizhub 361 - Manual (Page 163)

501/421/361 3-30
User Operations 3
9
Touch [Password].
10
Enter the currently set 8-digit User Box Password from the keyboard or keypad.
– Press the [C] key to clear all characters.
– Touch [Delete] to delete the last character entered.
– Touch [Shift] to show the upper case/symbol screen.
– Touch [Cancel] to go back to the screen shown in step 9.
11
Touch [OK].
? What happens if the User Box Password entered does not meet the requirements of the Password
Rules?
% If the User Box Password entered does not match the current password, a message appears that
tells that the User Box Password entered is wrong. Enter the correct User Box Password.
% If the Enhanced Security Mode is set to [ON], entry of a wrong User Box Password is counted as
unauthorized access. If a wrong User Box Password is entered a predetermined number of times
(once to three times) set by the Administrator of the machine, the screen of step 2 reappears and
the machine is set into an access lock state. To cancel the access lock state, the Administrator of
the machine must perform the Release Setting. Contact the Administrator of the machine.