Konica Minolta bizhub 361 - Manual (Page 203)

501/421/361 4-25
Application Software 4
4.2.3 Changing User Box properties (user attributes, account attributes)
2
Reminder
If the "Save box password until disconnected" check box has been selected, the User Box Password
entered is stored in the PC being used. If you do not want the User Box Password stored, clear the
"Save box password until disconnected" check box.
0 For the procedure to access the User Box, see steps 1 through 7 of "Accessing User Box" on
page 4-21 .
1
Access the User Box through PageScope Box Operator.
2
Select the icon of the desired User Box.
3
From the [File] menu, select [Property], or right-click to select [Property].
4
Make the necessary settings.
– To set the User Box Password, perform steps 7 through 9.
? What steps should be performed to change the owner of the User Box?
% To change the owner of the User Box, enter the user name that has been registered with this
machine as a user for a Personal User Box and that has been registered with this machine as an
account for a Group User Box.
% If Public is to be set for User Box Type, a password that meets the requirements of the Password
Rules must be entered in the "New Password" box. For details of the Password Rules, see
"Password Rules" on page 1-9 .
5
Click the [OK].
– If a User Box Password has been set, the password confirmation screen appears. Then, enter the
currently set 8-digit User Box Password and click [OK].