Konica Minolta bizhub 361 - Manual (Page 128)

501/421/361 2-111
Administrator Operations 2
2.21 SMB Setting Function
When access to the Administrator of the machine by the Administrator Settings is authenticated, the machine
enables setting of the NetBIOS Name.
2.21.1 Setting the NetBIOS Name
2
Note
Do not leave the machine with the setting screen of Administrator Settings left shown on the display. If
it is absolutely necessary to leave the machine, be sure first to log off from the Administrator Settings.
0 For the procedure to call the Network Settings menu to the display, see steps 1 and 2 of "Changing
the auth-password and priv-password" on page 2-96 .
1
Call the Network Settings to the screen from the control panel.
2
Touch [SMB Settings].
3
Touch [Print Settings].
4
Touch [NetBIOS Name].
5
Make the necessary settings.
6
Touch [OK].
0 For the procedure to call the Network menu to the display, see steps 1 and 2 of "Changing the auth-
password and priv-password" on page 2-96 .
1
Start the PageScope Web Connection and call the Network menu to the display.
2
Click the [SMB Setting] menu.
3
Click the [Print Setting] menu.
4
Enter the NetBIOS Name in the "NetBIOS Name" box.
5
Click the [OK].
6
Click the [OK].
7
Click the [Logout].