beautypg.com

Door release, Using the privacy function – Aiphone IS-SOFT User Manual

Page 18

background image

18

Door release

You can release the door while being called from,
communicating with, or monitoring a sub station if a door
release device is connected to the station.

Click

while being called from, communicating with, or

monitoring the sub station.

The door is released for the time set in the System setting on a
PC.

*

is lit while the door is released.

If the set release time is “0”, it can be released while the

*

button is clicked and held.

CAUTION:

Be sure to confi rm the visitor securely before releasing the door if the
sub station has no camera.

NOTE:

This function is disabled during scan-monitoring. (

P. 26)

Using the PRIVACY function

The PRIVACY function of a PC master station prevents you from
being heard by other (PC) master stations in your site or remote
sites that call you.

To activate the PRIVACY function

Set “Privacy” to “Privacy 1” or “Privacy 2” in the Setting window.
If you will not use the PRIVACY function, set it to “OFF”.
(→“SETTING MANUAL”)

When set to “Privacy 1” or “Privacy 2”, the PRIVACY

*

button lights up.

While receiving a call

When the PRIVACY function is activated

The microphone of your PC master station is muted, so the
sounds at your side are not heard by the caller.

When the PRIVACY function is off

The microphone of your PC master station is enabled, so the
sounds at your side are heard by the caller.

To communicate with the caller

When th

e PRIVACY function is activated

Click

, and the microphone is enabled. Then you can

communicate with the caller.

When the PRIVACY function is off

You can communicate with the caller without clicking

.

To mute the microp

*

hone temporarily:

Click and hold

, and the microphone is muted. Release

to enable the microphone.

The status of PC master station depending on the

PRIVACY mode

PRIVACY

mode

PRIVACY

LED

When receiving a call from
another (PC) master station
in your site or remote site

When communicating
with a sub station

1

Lit

The microphone is muted.

When you click

to answer the call, the
microphone is enabled.

Microphone is enabled.

The microphone is

muted while clicking

.

2

Lit

The microphone is muted.

When you receive a call from a

(PC) master station or remote
site, the caller and you are
notifi ed by a tone that you are
in the PRIVACY mode. When

you click

to answer the

call, the microphone is enabled.

OFF

Off

The microphone is enabled.

Communication starts when a
direct voice call arrives from a (PC)
master station or remote site.
The micr

ophone is muted

while clicking

.

NOTE:

When "Communication method" is set to "Press to talk" in the Setting
window, you do not have to activate the PRIVACY function.