Alamo RHINO TX235 - Manual (Page 138)

MAINTENANCE
TX235 02/07 Maintenance Section 5-2
© 2007 Alamo Group Inc.
MAINTENANCE
Before operating your Mower, make sure it is properly lubricated and thoroughly inspected. Only a minimum of
time and effort is required to regularly lubricate and maintain this machine to provide long life and trouble free
operation.
Always disengage the PTO before raising the Rotary Cutter for transporting or making
adjustments.
LUBRICATION INFORMATION
Do not let excess grease collect on or around parts, particularly when operating in sandy areas. The
illustrations below shows lubrication points. The chart gives the frequency of lubrication in hours, based on
normal operating conditions. Severe or unusual conditions may require more frequent lubrication. See Mnt-R-
0276.
Use an SAE multi-purpose, lithium-type grease for all grease locations shown. Be sure to clean the fitting
thoroughly before using grease gun. Daily lubrication of the main driveline slip joint is necessary. Failure to
maintain proper lubrication will result in damage to U-joints, gearbox, and/or driveshaft.