Lenovo ThinkVantage (Power Manager Deployment) - Manual (Page 51)

Table 6. Power Agenda* (continued)
Policy settings Description
ThinkPad LCD Brightness 16 Specifies the brightness level (from 0 to 15) of client
computer monitors with 16 brightness levels.
If you set the Action policy setting to Change monitor
brightness, you should enable this policy setting and
input a brightness level. See the action policy setting in
Table 6 “Power Agenda*” on page 42.
If you disable or do not configure this policy setting,
but set the Action policy setting to Change monitor
brightness, users cannot use this power agenda on
client computers. See the action policy setting in Table 6
“Power Agenda*” on page 42.
Note: The range of the brightness level is from 0 to
15. The monitor brightness increases when you select
a higher brightness level. This policy setting does not
support monitors with a brightness level higher than 15.
ThinkPad LCD Brightness 8 Specifies the brightness level (from 0 to 7) of client
computer monitors with 8 brightness levels.
If you set the Action policy setting to Change monitor
brightness, you should enable this policy setting and
input a brightness level. See the action policy setting in
Table 6 “Power Agenda*” on page 42.
If you disable or do not configure this policy setting,
but set the Action policy setting to Change monitor
brightness, users cannot use this power agenda on
client computers. See the action policy setting in Table 6
“Power Agenda*” on page 42.
Note: The range of the brightness level is from 0 to 7. The
monitor brightness increases when you select a higher
brightness level. This policy setting does not support
monitors with a brightness level higher than 7.
External monitor brightness Specifies the brightness level (from 0 to 100) of the
external monitor.
If you set the Action policy setting to Change monitor
brightness, you should enable this policy setting and
input a brightness level. See the action policy setting in
Table 6 “Power Agenda*” on page 42.
If you disable or do not configure this policy setting,
but set the Action policy setting to Change monitor
brightness, users cannot use this power agenda on
client computers. See the action policy setting in Table 6
“Power Agenda*” on page 42.
Notes:
1. The range of the brightness level is from 0 to 100.
The external monitor brightness increases when you
select a higher brightness level. This policy setting
does not support monitors with a brightness level
higher than 100.
Chapter 3 . Working with Active Directory and ADM or ADMX files 45